GeorgiaCrickettzCreationz

I am back!

2011-01-11T12:24:00.001-08:00

It's been a while since I have wrote any tutorials let alone make a tag....I finally got my mojo back and will making tags and writing them up real soon....Please be patient with me!

I wanna be a Rock Star

2009-10-01T12:25:00.000-07:00

This tutorial was written by and created

by Crickett on October 1, 2009

Any similarity to any other tutorial is purely coincidental

This was made using PSPX2 and assumes you have knowledge working with PSP

I am using the Artwork of ©Elias Chatzoudis

You must have license to use his work and you can get it here MPT

Supplies Needed:

Tube of Choice

Missy's Template 163 You can get it HERE

Font used A&S Black Swan

Scrap Kit of Choice or the one I used

Bluedream Designs Club!

Which you can get HERE

Eyecandy4000 Gradient Glow (optional)
Mura's Meister Copies (optional)
*If anything here belongs to you please contact me and I will either give you credit or remove it*

OK let's get started

Drop Shadow used for all Layers V & H 2 Opacity 30 Blur 5.00

Open Template->Shift D to Duplicate->Close the Original

Go to Image Canvas Size 650x650

Flood fill background layer white
Delete the copyright and word art layer

Select Star 1 Layer ->Select All Float->Defloat

C/P Paper 7 as a new layer->Selections Invert->Delete->Select none

Delete the original layer → Colorize to match your tube
Select Star 2 Layer ->Select All Float->Defloat

C/P Paper 4 as a new layer->Selections Invert->Delete->Select none

Delete the original layer → Colorize to match your tube
Apply Eyecandy 4000 Gradient Glow to both star layers
Fat Black (3.00 25 100)
Leave the Music Note layer black and apply Gradient Glow Fat (White)
C/P record from the kit → resize by 65% 3 times → colorize and place in the
center of your tag → apply Mura's copies (Spiral) with default settings
place above background layer → resize by 90%
C/P notepaper from the kit → resize by 65% twice
colorize → image free rotate left 25 degrees and place below music note layer
C/P star 2 from the kit → resize by 65% three times → colorize
place at the bottom left corner of the note paper
With a font of choice → size 36 → type out the words
“I wanna be a Rock Star”
convert to raster → image free rotate left 25 degrees and place on the note paper

C/P any other elements of your choice from the kit

Drop Shadow all layers
Resize your image with all layers checked by 85%
C/P tube of your choice and drop shadow

Add your name and copyright info

Save as JPEG or PNG
(If you are saving as a PNG file delete the background layer)

THANKS FOR TRYING MY TUTORIAL

RAC Star

2009-10-01T12:12:00.000-07:00

This tutorial was written by and created

by Crickett on September 29, 2009

Any similarity to any other tutorial is purely coincidental

This was made using PSPX2 and assumes you have knowledge working with PSP

I am using the Artwork of ©Ismael Rac

You must have license to use his work and you can get it here AMI

Supplies Needed:

Tube(s) of Choice

Mask of Choice

Missy's Template 171 You can get it HERE

Font used Ravenscroft

Scrap Kit of Choice or the one I used

Yvette's Rock Revolution You can get it HERE

Eyecandy4000 grad glow Thin (optional)
*If anything here belongs to you please contact me and I will either give you credit or remove it*

OK let's get started

Drop Shadow used for all Layers V & H 1Opacity 40 Blur 3.00

Open Template->Shift D to Duplicate->Close the Original

Go to Image Canvas Size 650x650

Flood fill background layer white
Delete the copyright and word art layers

Select Circle 1 Layer ->Select All Float->Defloat

C/P Paper 6 as a new layer

Selections Invert->Delete->Select none

Delete the original layer

Select Circle 2 Layer ->Select All Float->Defloat

C/P Paper 10 as a new layer->Selections Invert->Delete->Select none

Delete the original layer

Select Circle 3 Layer ->Select All Float->Defloat

C/P Paper 8 as a new layer->Selections Invert->Delete->Select none

Delete the original layerC/P any elements of your choice from the kit

Drop Shadow all layers

C/P tube of your choice and drop shadow

Add your name and copyright info

Save as JPEG or PNG

THANKS FOR TRYING MY TUTORIAL

Rockin Garv Girls

2009-10-01T12:08:00.001-07:00

This tutorial was written and created

by Crickett on September 29, 2009

Any similarity to any other tutorial is purely coincidental

This was made using PSPX2 and assumes you have knowledge working with PSP

I am using the Artwork of ©Keith Garvey

You must have license to use his work and you can get it here MPT

Supplies Needed:

Tube(s) of Choice

Font of Choice
Mask of Choice

Scrap Kit of Choice or the one I used

Chic Rocker @ SammyGrrlsDesignz

NO OUTSIDE FILTERS NEEDED

*If anything here belongs to you please contact me and I will either give you credit or remove it*

OK let's get started

Drop Shadow used for allLayers V & H 1 Opacity 40 Blur 3.00
New Image 650x650
C/P frame 5 from the kit → New Layer → Select inside your frame
modify expand by 6 → flood fill with color or paper of your choice
C/P heart with wings 2 as a new layer → resize by 65% 3 times → place where
desired on your tag
C/P Rock word art as a new layer → image resize by 65% twice → place where
desired on your tag
C/P layered stars 1 and 2 as new layers → image resize by 50% twice → place
where desired on your tag
C/P heart flourish as a new layer → image rezise by 50% twice → image free
rotate 15 degrees left → place at the top of the frame
C/P music notes 1, 2, and 3 as new layers → resize by 50% twice → place where
desired on your tag
C/P arrow 2 as a new layer → resize by 45% place below frame layer → duplicate and place
above your frame layer → erase the parts that you don't want showing
C/P tubes as new layers below your frame layer → erase parts that you don't want showing
C/P paper of your choice from the kit → load mask of your choice → merge group
Drop Shadow all layers

Add your name and copyright info

Save as JPEG or PNG

THANKS FOR TRYING MY TUTORIAL

Spooky Halloween

2009-10-01T11:40:00.000-07:00

This tutorial was written by and created by Crickett on September 30, 2009

Any similarity to any other tutorial is purely coincidental

This was made using PSPX2 and assumes you have knowledge working with PSP

I am using the Artwork of ©Keith Garvey

You must have license to use his workand you can get it here MPT

Supplies Needed:
Fi's Template 02 It can be found HERE

Tube of Choice
Word Art of Choice
Font used Dagger

Mask of Choice

Scrap Kit of Choice
(I used two different kits
Bel Vidotti's Spooky and Lacarolita's Scream at the Night)
Eyecandy4000 Gradient Glow
Settings:
Basic: 3/25/100
Color: Thin (Black)

*If anything here belongs to you please contact me and I will either give you credit or remove it*

Drop Shadow used for all LayersV & H 2Opacity 30Blur 5.00

OK let's get started

Open the template in PSP → Shift D to duplicate
Close the original and delete the copyright layers, left squares and right squares layers

Image Canvas Size 700x700 (you can crop it down later)
Flood fill your background with white
Select your center back layer → c/p paper 25 as new layer → select inside
your frame layer → modify expand by 6 and delete the excess paper
delete the original center back layer
Select your left back layer → c/p paper 28 as new layer → select inside
your frame layer → modify expand by 6 and delete the excess paper
delete the original left back layer
Select your right back layer → c/p paper 28 as new layer → select inside
your frame layer → modify expand by 6 and delete the excess paper
delete the original right back layer
Add a new raster layer and fill with a color from your tube
Select inside all of your frame layers → modify expand by 6 and delete the excess
move to the layer above your background layer
Change the blend mode to all of your paper layers to Luminance (L)
Add Eyecandy4000 with the settings above to all of your Frame Layers
Leave your bottom back layer black
C/P the tree from Lacarolita's kit as new layer → resize by 65% 3 times
place up under your left frame layer → duplicate image mirror → place under the
right frame layer
C/P the mansion and gate from the same kit → resize by 50% twice
and place under the center back frame
C/P any other elements from the kits and resize to your liking
Add a new layer above your background and flood fill with a color
of choice and add a mask of choice
C/P a tube of choice and place where desired on your tag
Drop Shadow all Layers with the settings from above
Add your name and copyright info
Resize your tag by 85% all layers checked

Save as JPEG or PNG

THANKS FOR TRYING MY TUTORIAL

Girl's Best Friend

2009-09-16T23:12:00.000-07:00

This tutorial was written by and created

by Crickett on September 17, 2009

Any similarity to any other tutorial is purely coincidental

This was made using PSPX2 and assumes you have knowledge working with PSP

I am using the Artwork of ©Keith Garvey

You must have license to use his work and you can get it here MPT

Supplies Needed:

Tube(s) of Choice

Mask of Choice ( I used BabesDesignz33)

Font of Choice

Scrap Kit of Choice or the one I usedDiamond Blues @ Scraps Dimensions

*If anything here belongs to you please contact me and I will either give you credit or remove it*

OK let's get started

Drop Shadow used for all

Layers V & H 1 Opacity 40 Blur 3.00
Open Frame 1 from the Kit → Shift D to duplicate → Resize by 85% 2 Times
Layers → New Raster Layer → Select inside your frame → Modify expand by 5
Copy and Paste Paper 5 into selection → Select None
Copy and Paste Bling Element 2 as a new layer →

Resize by 65% 2 Times Paste above paper layer
Change the Blend Mode to Soft Light
Copy and Paste String of Roses → Resize by 65% 2 times place at bottom of the frame →
Duplicate → Image Free Rotate 90 degrees left/right → place on the side of the Frame → Duplicate and Mirror it to make a Frame of Roses on your original Frame
Copy and Paste Tube of Choice under the Frame Layer and Above the Bling Element
→ Erase off any excess
Copy and Paste Candles, Cushion, Ring and Shoes as new layers
→ Resize by 65% then to a size appropriate for your taste
Copy and Paste any other elements of your choice from the kit
New Raster Layer → Select All → Copy and Paste Paper 6 into Selection
Load Mask from Disk
Source Luminance → Fit to Layer → Hide all Mask → Invert Transparency All Checked
Copy and Paste the Word Art from the Kit and Resize to a Size that you are happy with

Drop Shadow all layers

Add your name and copyright info

Save as JPEG or PNG

THANKS FOR TRYING MY TUTORIAL

Garv's Haunted House

2009-09-11T23:38:00.000-07:00

This tutorial was written by and created by Crickett

on September 11, 2009
Any similarity to any other tutorial is purely coincidental
This was made using PSPX2and assumes you have knowledge working with PSP
I am using the Artwork of ©Keith Garvey

You must have license to use his work
and you can get it here MPT

Supplies Needed:
Tube of Choice
Misted Image of Choice ( Halloween)
Halloween Brushes of Choice
Word Art of Choice
Font used A & S California PlugScrap Kit of Choice or the one I used
Frighfully Halloween @ Rockin's Ruckus

Eyecandy4000 Gradient Glow
Settings:
Basic: 3/25/100
Color: Thin White

*Some elements used in this Tag I can't remember where
I got them from so you can get Creative
and use elements of your choice*

*If anything here belongs to you please contact me and I will either give you credit or remove it*
OK let's get started

Drop Shadow used for all LayersV & H 1Opacity 40Blur 3.00

New Image 650 x 650 ( You can resize later)

From the kit C/P rr_frame 2 as a new layer → Resize 85% Smart Size

Add a new layer → Select inside the frame with your magic wand → Modify
expand by 4 → Flood fill your new layer with Black

DO NOT DESELECT

C/P Misted Image under your frame layer and above the Black layer
Selections Invert → Delete off the excess → Select None → Change the Blend Mode
to Luminance (L) and lower the opacity to 65

C/P Headstone (rr_element1) as a new layer → resize to 85% or a size to your liking
Place in the bottom left corner of your tag (See tag for reference)

C/P the Skull (rr_element7) as a new layer → resize to your liking → image free
rotate right 20 degrees and place where desired (See tag for reference)

C/P the Ghost (rr_element10) as a new layer → resize by 85% twice →
place below your frame and above your misted image → Apply Eyecandy4000 with
the settings from above (See tag for reference)

This is where the Creative Part comes in....
C/P any elements of choice and place as desired

I added Brushes to separate layers for my Moon, Bats, and Misc Items I used
on the windows of the Haunted House Image

Drop Shadow all Layers with the settings from above

Add your name and copyright info

Save as JPEG or PNG
THANKS FOR TRYING MY TUTORIAL

Missing You

2009-09-09T20:43:00.000-07:00

This tutorial was written by and created by Crickett
on September 9, 2009
Any similarity to any other tutorial is purely coincidental
This was made using PSPX2 and assumes you have knowledge working with PSP
I am using the Artwork of ©Keith Garvey
You must have license to use his workand you can get it hereMPT

Supplies Needed:
Tube(s) of Choice
Mask of Choice ( I used Vix Mask177)
Yvette's Template 17 You can get it HERE
Font used Sweetheart
ScriptScrap Kit of Choice or the one I used
FM Pretty in Pink @ FantasyMoments

*If anything here belongs to you please contact me
and I will either give you credit or remove it*

OK let's get started

Drop Shadow used for all
LayersV & H 1Opacity 40Blur 3.00

Open Template->Shift D to Duplicate->Close the Original
Go to Image Canvas Size 600x600
Floodfill background layer white

Select Heart Layer ->Select All Float->Defloat
C/P Paper 17 as a new layer->Selections Invert->Delete->Select none
Delete the original layer

Select Heart Frame 1 Layer ->Select All Float->Defloat
C/P Paper 3 as a new layer->Selections Invert->Delete->Select none
Delete the original layer

Repeat the same steps with Heart Frame Top Layer

Select Rectangle 2 Layer ->Select All Float->Defloat
C/P Paper 5 as a new layer->Selections Invert->Delete->Select none
Delete the original layer

Select Rectangle 1 Layer ->Select All Float->Defloat
C/P Paper 19 as a new layer->Selections Invert->Delete->Select none
Delete the original layer

C/P any elements of your choice from the kit

Drop Shadow all layers

C/P tube of your choice and drop shadow

C/P Close Up of Tube under Rectangle 2 Frame

and above your fill layer

Add your name and copyright info

Save as JPEG or PNG

THANKS FOR TRYING MY TUTORIAL

Missing In Action

2009-09-09T19:42:00.000-07:00

Hello Everyone,
I just wanted to let you all know that I have been MIA for the past few months due to having problems with my computer. Well now that I have it all fixed I am going to start writting Tag Tutorials again. I hope that you are all in Good Spirits and I hope to post more tuts shortly.
Thanks for standing by me.

Hugs Crickett

A Garvey Easter

2009-03-20T20:51:00.000-07:00

This tutorial was written by and created by Crickett
on March 20 2009
Any similarity to any other tutorial is purely coincidental
This was made using PSPX2
and assumes you have knowledge working with PSP
I am using the Artwork of ©Keith Garvey
You must have license to use his work
and you can get it here
MPT
Supplies Needed:
Tube of Choice
Font used A & S Black Swan
Scrap Kits used were
FTU Bunny Trail © Jillzy
PTU CottonTail Lane © Kristi Westling (Divine Digital)
*If anything here belongs to you please contact me
and I will either give you credit or remove it*
OK let's get started
Drop Shadow used for all Layers
V & H 1
Opacity 40
Blur 3.00
Open New Image 600x600
Copy and Paste Frame 3 from the kit
Select inside the frame with your selection tool > modify expand by 5>
layers new raster layer>flood fill with pattern or color of your choice
Copy and Paste colored eggs from Jillzy's Kit
>image resize 45% twice>place at the bottom of the frame to the right
Copy and Paste jellybeans from the same kit>image resize 45% twice
>place in front of the eggs
Copy and Paste the easter bunny from the same kit>image resize 45% twice>
place between the jelly beans and colored eggs layers
Copy and Paste doodle 2 from Kristi's Kit
>image resize 10%>place at the top left of the frame
>duplicate>mirror>merge down>duplicate>image free rotate 90 degrees left>
place on the left shutter>duplicate>mirror>place on the right shutter
Copy and Paste the tree from the same kit>image resize 10% then 75%
>place up under frame layer to the right
Copy and Paste birdhouse 1 from the same kit>image resize 10% then 65%
>place beside the tree up under frame layer
Copy and Paste any other elements of your choice from the kits
Drop Shadow all layers
Copy and Paste tube of your choice and drop shadow
Add your name and copyright info
Save as JPEG or PNG
THANKS FOR TRYING MY TUTORIAL

Hoppy Easter

2009-03-16T20:58:00.000-07:00

This tutorial was written by and created by Crickett
on March 16 2009
Any similarity to any other tutorial is purely coincidental
This was made using PSPX2
and assumes you have knowledge working with PSP
I am using the Artwork of © Elias Chatzoudis
You must have license to use his work
and you can get it here
MPT
Supplies Needed:
Tube of Choice
Font Kristen ITC
Scrap Kit used was Eggstravaganza @ Simply Sensational Scraps
No OUTSIDE FILTERS NEEDED
*If anything here belongs to you please contact me
and I will either give you credit or remove it*
OK let's get started
Drop Shadow used for all Layers
V & H 1
Opacity 40
Blur 3.00
This is a real easy tutorial
I am giving you the basics so that you can come up with your
own tag and be creative
Open New Image 600x600
Copy and Paste Frame 4 from the kit
Select inside the frame with your selection tool > modify expand by 5
Add a new raster layer>fill with cloud pattern provided with PSP>select none
Copy and Paste grass of your choice from the kit>resize by 45% Smart Size
>duplicate as many times
as needed to fill the bottom of the frame > drop shadow
Copy and Paste flowers of your choice>resize by 45%Smart Size > place at different heights below the grass layer up under the frame > drop shadow each flower
Copy and Paste Basket 1 from the kit
> image resize 45% place at the bottom of the frame > drop shadow
Copy and Paste eggs of choice from the kit > resize by 45% > rotate at different angles > place at the bottom of the basket > drop shadow each layer
Copy and Paste any other elements of your choice > drop shadow each layer
Add your tube > place where desired > drop shadow
Add your name and copyright info
Save as JPEG or PNG
THANKS FOR TRYING MY TUTORIAL

Hello

2009-03-16T14:35:00.000-07:00

Hello everyone
I just wanted to say hi to everyone....I have added 2 more tutorials to the blog. I have had some internet problems due to the weather so I am just now getting around to posting them. I send Thanks out to all of you for your support. I would love to see your results from trying my tutorials and I will post them on my blog as a slide show. You can send me your results HEREand I will post them for people to see what you have come up with using my tutorials.

Sexy Babe

2009-03-16T14:29:00.000-07:00

This tutorial was written by and created by Crickett
on March 14 2009
Any similarity to any other tutorial is purely coincidental
This was made using PSPX2
and assumes you have knowledge working with PSP
I am using the Artwork of ©Keith Garvey
You must have license to use his work
and you can get it here
MPT
Supplies Needed:
2 Tubes of Choice
Font used A & S Black Swan
Eyecandy 4000 (Optional)
Weescotslass Mask333
I used WSL mask333 included HERE
Scrap Kit used was Sexy Cool @ Simply Sensational Scraps

*If anything here belongs to you please contact me
and I will either give you credit or remove it*

OK let's get started

Drop Shadow used for all Layers
V & H 1
Opacity 40
Blur 3.00
Open New Image 600x600

Copy and Paste Frame 2 from the kit > resize by 85%
Select inside the frame with your selection tool > modify expand by 5

Copy and Paste paper 6 from the kit as a new layer
selections > invert > delete > de-select > drop shadow frame layer

Copy and Paste frame 3 from the kit > resize by 50% >
image free rotate > 15 degrees right > drop shadow

Select inside the frame with your selection tool > modify expand by 5
Copy and Paste paper 5 as a new layer
selections > invert > delete >do not de-select yet

Copy and Paste a close up of your tube of choice under the frame layer

Delete to remove excess > selections none > drop shadow

Add elements of your choice from the kit > drop shadow all of them

Add a new raster layer fill with color from your tube
Arrange>Send to Bottom
Load mask from disk > Source Luminance Checked
Fit to Layer > Hide all Mask Checked
Merge Group

Repeat steps above with a different color from tube > image resize 90% > image free rotate 90 degrees Left

Copy and Paste your tube as new layer > layers duplicate > move the copy under the frame layer > use your selection tool to remove parts that you don't want shown >
repeat same steps on the original tube layer > drop shadow copy only

Add your name and copyright info

I used Eyecandy 4000 Gradient Glow > Thin > Color from tube on my name

Save as JPEG or PNG

THANKS FOR TRYING MY TUTORIAL

Simple but Elegant

2009-03-16T14:22:00.000-07:00

This tutorial was written by and created by Crickett
on March 13 2009
Any similarity to any other tutorial is purely coincidental
This was made using PSPX2
and assumes you have knowledge working with PSP
I am using the Artwork of ©Barbara Jensen
You must have license to use her work
and you can get it here
Supplies Needed:
Tube of Choice
Font of Choice
Scrap Kit used was Golden Creams @ Simply Sensational Scraps
*If anything here belongs to you please contact me
and I will either give you credit or remove it*
This is a really simple tutorial

OK let's get started

Drop Shadow used for all Layers
V & H 1
Opacity 40
Blur 3.00
Open New Image 600x600

Copy and Paste Frame 2 from the kit > resize by 85%

Select around the frame with your selection tool > modify expand by 2
Copy and Paste paper 9 from the kit as a new layer
selections > invert > delete > do not de-select

Copy and Paste your tube as new layer > layers duplicate > move the copy under the frame layer > delete > select none
repeat same steps on the original tube layer > drop shadow copy only

Copy and Paste Flower Corner 2 from the kit and place it on the
top left corner under the frame and paper layers
duplicate > image mirror > merge down > duplicate > image flip > drop shadow

You should now have a flower frame up under your original frame layer

Copy and Paste Doodle 3 from the kit
> move to layer above your background layer > drop shadow

Copy and Paste Ribbon Flower 4 as a new layer
> image resize 45% > resize again 85% > drop shadow

Copy and Paste Heart Charm 2 as a new layer > image resize 45%> drop shadow

Copy and Paste Leaves 1 as a new layer > image resize 45% twice
move to lower right corner of your frame > drop shadow

Copy and Paste Flower 6 as a new layer > image resize 45%
move to lower right corner of your frame above your leaves layer > drop shadow

Add your name and copyright info

Save as JPEG or PNG

THANKS FOR TRYING MY TUTORIAL

Spring Blossoms

2009-03-10T11:58:00.000-07:00

This tutorial was written by and created by Crickett
on March 10 2009
Any similarity to any other tutorial is purely coincidental
This was made using PSPX2
and assumes you have knowledge working with PSP
I am using the Artwork of ©Ismael Rac
You must have license to use his work
and you can get it here
MPT

Supplies Needed:
Tube of Choice
Font of Choice
Missy's Template 45 Misfits Scrapz
Cotton Candy scrap kit by StitchyAngel
PTU Scrap Kit so I can't provide it
Thank You Stitchy for allowing me to use
your Scrap Kit in my tutorial

NO OUTSIDE FILTERS

*If anything here belongs to you please contact me
and I will either give you credit or remove it*

OK let's get started
Open your template in PSP Shift+D to duplicate it
Close the original
Delete the Star and Circles Layers

Select your Rectangle 1 Layer
Selections>Select All>Float>Defloat>Modify Smooth by 10
copy and paste paper 6 as new layer
Selections>Invert>Delete
Go to Adjust<>Colorize both at 0

Select your Rectangle 2 Layer
Selections>Select All>Float>Defloat>Modify Smooth by 10
copy and paste paper 19 as a new layer
Selections invert > delete > select none

Select your Rectangle 3 Layer
Selections>Select All>Float>Defloat>Modify Smooth by 10
copy and paste paper 15 as a new layer
Selections invert > delete > select none

Copy and Paste the Heart Frame from the Kit
Go to Adjust> Hue and Saturation>Colorize both at 0
Copy and Paste a closeup of your tube under the Heart Frame
resize to fit. Take your selection tool>point to point>go around your frame
Add a new raster layer>flood fill with Black (make sure this layer is up under your closeup of your tube)

Copy and Paste any elements of your choice from the kit>dropshadow

Copy and Paste tube of your choice>dropshadow

Delete all of your original template layers and
drop shadow with these settings:
V &H 1 Opacity 40 Blur 3

Add your name and copyright info

Save as JPEG or PNG

THANKS FOR TRYING MY TUTORIAL

Believe

2009-03-09T18:23:00.000-07:00

This tutorial was written by and created by Crickett
on March 9 2009
Any similarity to any other tutorial is purely coincidental
This was made using PSPX2
and assumes you have knowledge working with PSP
I am using the Artwork of ©Jennifer Janesko
You must have license to use her work
and you can get it here
CILM

Supplies Needed:
Never Never Land Scrap Kit
provided by Robyn@Outlaw Women Scrapbook
Tube of Choice
Font used UpDock
Yvette's Template 51
here Misfits Scrapz
Eyecandy 4000 (Optional)
*If anything here belongs to you please contact me
and I will either give you credit or remove it*

OK let's get started

Open your template in PSP Shift+D to duplicate it
Close the original

Go to image canvas size 600 x 600 and delete the copyright layer

Select your circle layer
Selections>Select All>Float>Defloat>Modify Smooth by 10
copy and paste paper 11 as new layer resize by 45 percent
Selections>Invert>Delete

Select layer 2 of template
Selections>Select All>Float>Defloat>Modify Smooth by 10
copy and paste paper 1 as a new layer resize by 45 percent
Selections invert > delete > select none

Select layer 3 of template
Selections>Select All>Float>Defloat>Modify Smooth by 10
copy and paste paper 8 as a new layer resize by 45 percent
Selections invert > delete > select none

Select layer 4 of template
Selections>Select All>Float>Defloat> Modify Smooth by 10
copy and paste paper 13 as a new layer resize resize by 45 percent
Selections invert > delete > select none

Delete all of your original template layers and
drop shadow with these settings:
V &H 1 Opacity 40 Blur 3

Add elements of your choice from the kit
If you are using the same kit
resize your elements to 15 percent then resize again by 85 percent
I colorized to match my tube

Copy and paste your tube as a new layer and dropshadow

Add your name and copyright info
(I used gradient glow for the Wordart made by me)

Thanks to Robyn for providing me with the Scrap Kit
to make this tag

Save as JPEG or PNG
THANKS FOR TRYING MY TUTORIAL

At It Again

2009-03-09T18:13:00.000-07:00

Hello Everyone,

I just wanted to thank you all for the compliments that you have left for me on my Chat Box. I really appreciate all of your support. My family and friends have been getting tags from me for years that I have created but I never had the nerve to sit down and put them on paper for other people to try. I am proud of my success and my family and friends are behind me every step of the way. I will call Sammy in here and ask his opinions and he is like no go with a different color or try a different tube with that. He has been my backbone through all of my blogging success. Afterall, he is the one that pays for me to get all of the wonderful tubes and scrap kits that I use in my creations. It has been a long week-end for me and I just opened PSP up about 2 hours ago to come up with another tag. I hope that you all like it. I used a scrap kit called Never Never Land by Robyn @ Outlaw Women Scrapbook Emporium. Thanks a bunch Robyn for letting me use your work in my Tag.

Boyz Suck

2009-03-05T18:14:00.001-08:00

This tutorial was written by and created by Crickett
on March 5 2009
Any similarity to any other tutorial is purely coincidental
This was made using PSPX2
and assumes you have knowledge working with PSP
I am using the Artwork of ©Keith Garvey
You must have license to use his work
and you can get it here
MPT
Supplies Needed:
Tube of Choice
Brushes of Choice
Font used Impact
Yvette's Template 15
and Girlz Rock by Yvette you can get them
here Misfits Scrapz
Eyecandy 4000 (Optional)

*If anything here belongs to you please contact me
and I will either give you credit or remove it*

OK let's get started

Open your template in PSP Shift+D to duplicate it
Close the original
Go to image canvas size 600 x 600 and delete the copyright layer

Select your circle layer
Selections>Select All>Float>Defloat>Modify Smooth by 10
copy and paste paper 16 as new layer
Selections>Invert>Delete

Select your fill layer
Selections>Select All>Float>Defloat>Expand by 2
copy and paste paper 3 as a new layer
Selections invert > delete > select none

Select your frame layer
Selections>Select All>Float>Defloat
copy and paste paper 17 as a new layer
Selections invert > delete > select none

Select your Star 1 layer
Selections>Select All>Float>Defloat>
copy and paste paper 3 as a new layer
Selections invert > delete > select none

Select your Star 2 layer
Selections>Select All>Float>Defloat>
copy and paste paper 6 as a new layer
Selections invert > delete > select none

Select your Star 3 layer
Selections>Select All>Float>Defloat>
copy and paste paper 9 as a new layer
Selections invert > delete > select none

Select your Star 4 layer
Selections>Select All>Float>Defloat>
copy and paste paper 14 as a new layer
Selections invert > delete > select none

Delete all of your original template layers and
drop shadow with these settings:
V &H 1 Opacity 40 Blur 3

Add elements of your choice from the kit
and drop shadow them

Add a new raster layer and apply brushes of
your choice Arrange>Send to Bottom
Copy and Paste your tube as new layer
Add your name and copyright info
(I used gradient glow for my name and the Wordart)

Save as JPEG or PNG
THANKS FOR TRYING MY TUTORIAL

Whatever Go Away

2009-03-04T21:54:00.000-08:00

This is my second tutorial. It was created by LilMama AKA Carey and Written by Me

This tutorial was written by Crickett and Created by LilMama
on March 4 2009
Any similarity to any other tutorial is purely coincidental
This was made using PSPX2
and assumes you have knowledge working with PSP
I am using the Artwork of ©Elias Chatzoudis
You must have license to use his work
and you can get it here
MPT
Supplies Needed:
Mask HERE
Tube of Choice
Fonts used Waterbrush Rob (Pay Font) for the Word Art and Name
Scrap Kit by
StacieCakesCreations(GOCollab Freebie)
Missy's Template 177 Divine Intentionz
*If anything here belongs to you please contact me
and I will either give you credit or remove it*
NO OUTSIDE FILTERS
OK let's get started
Open your template in PSP Shift+D to duplicate it
Close the original
Go to image canvas size 725 x 600 and delete the copyright layer
Copy and paste paper 4 from the kit as a new layer
apply your mask and merge group
Select your shape layer
Selections>Select All>Float>Defloat>Expand by 2
copy and paste paper 7 as a new layer
Selections invert > delete > select none
Select your circle layers
Selections>Select All>Float>Defloat>Expand by 2
copy and paste paper 9 as a new layer
Selections invert > delete > select none
Select your rectangle layer
Selections>Select All>Float>Defloat>Expand by 2
copy and paste paper 2 as a new layer
Selections invert > delete > select none
Select your rectangle 2 layer
Selections>Select All>Float>Defloat>Expand by 2
copy and paste paper 10 as a new layer
Selections invert > delete > select none
Delete all of your original template layers and
drop shadow with these settings:
V &H 0 Opacity 70 Blur 5
For your name
Open paper 10 and minimize
Set your background to pattern and foreground to white
type out your name and give it the following drop shadow
V &H 2 Opacity 70 Blur 5
For the Word Art
Type out the words in color of your choice
“Whatever Go Away”
Add the following drop shadow
V & H 2 Opacity 70 Blur 4
Save as JPEG or PNG
THANKS FOR TRYING OUR TUTORIAL

Lucky Charmz Tutorial

2009-03-04T15:32:00.000-08:00

I wrote this tutorial on March 4th 2009 and any similarity to any other tutorial is purely coincidental. Please feel free to print it out for your own personal use but please do not claim it as your own. All materials and tubes used are copyright to their respective owners and will be credited accordingly. If there is something I have used and it is yours, please let me know so I can give you the credit you deserve.
This tutorial assumes you have a good working knowledge of Paint Shop Pro
Supplies Needed:Paint Shop Pro (I used 9 but can be done in any version)Tube of Choice (I used the Gorgeous artwork of ©Keith Garvey )You can purchase a license to use his work
HERE
Template #31 by Kristin @ WICKED SCRAPZ HERE
Mask of Choice

Font of Choice (I Used Mandingo)
Eyecandy 4000 Gradient Glow/Glass
Mura's Meister Copies
Scrap Kit of choice PTU(The one I used is Paddy's Delight by Donna)
You can purchase her kits HERE
Drop Shadow used through out is
V & H 1
Opacity 40
Blur 3.00
Color Black
OK let's get started

Open you template in PSP Duplicate and Close the original
Image Canvas Size 700X700 (you can resize later)
Delete the copyright layer
Select your circle layer on the template
Go to selections-Select All-Selections Float-Selections Defloat
Modify smooth by 10 – New Raster Layer
Select a paper of choice – Paste into selection – Select none
(I used paper 5 from the kit)
Drop shadow as above – Delete original template layer
Repeat the same steps above for the rectangle layer and the 2 small rectangle layer
Select your Wordart Layer (Irish) and add the following settings

Eyecandy 4000 Gradient Glow:
Glow Width 3.00

Color from your tube-I used Green
Add drop shadow setting from above
Select your second Wordart layer
add the same gradient glow except change the color
to white and add the same drop shadow from above
Select your clover leaf layer-selections select all-selections float-selections defloat- smooth same settings from above
layers new raster layer- flood fill with a color from your tube-selections select none

Add the following Glass Effect:
Bevel Width 10.80

add drop shadow from above
Copy and Paste your tube as a new layer-drop shadow
Add any elements from the kit and drop shadow them
Copy and Paste 2 different flowers from the kit
resize one by 45 percent and the other by 45 percent then 85 percent
Apply Mura's Meister Copies with the following settings:

On the first flower X & Y shift is 55
On the second flower change the X & Y shift to 50
Drop shadow both layers-Send to bottom
Layers new raster flood fill with a color from your tube or paper and apply mask of choice
Add your name-drop shadow and copyright information save as jpeg or png
Thanks for trying my tutorial

My First Tutorial

2009-03-04T14:17:00.000-08:00

I wrote my first Tag Tut today. It seems like it took me forever but I got it done. I will be posting it sometime Thursday or Friday. I have to get help from Donna B on how to post tuts on here. LOL
I want to send Thanks out to LilMama AKA Carey and Donna B for encouraging me to go through with Tut Writing and Blogging.

BIG HUGS LADIES

Hello

2009-03-03T14:28:00.000-08:00

This is where I will be posting all the Tags that I have created/made for Family and Friends